Phihong Debuts New 33.6W PoE Midspan that Extends PoE up to 200 Meters and Features SNMP Protocol

For Immediate Release

March 07, 2013

For more information contact:

Richard Huang, Phihong USA

(510) 445-0100

richardh@phihongusa.com

Christine Stieglitz, BtB Marketing

(919) 872-8172

christine.stieglitz@btbmarketing.com

Phihong Debuts New 33.6W PoE Midspan that Extends PoE up to 200 Meters and Features SNMP Protocol

Fremont, CA (March 07, 2013) — Phihong USA, a global leader in the development of Power-over-Ethernet technology and solutions, has developed a new single-output midspan that can power IEEE802.3at compliant applications up to 200 meters (660 feet) from a network switch. The waterproof injector, designated the POE33S-1AT-N, has an output of 33.6W at 56V DC and is ideal for applications in harsh environments, including IP cameras and wireless access points. The midspan is also equipped with SNMP protocol, which allows users to remotely troubleshoot end devices.

“The benefit of waterproof PoE is that users can install them in locations that are difficult to reach and service,” said Keith Hopwood, vice president of marketing for Phihong USA. “By combining the benefits of our extender technology with SNMP, users can enhance their security networks by placing powered devices in remote locations and comfortably troubleshoot from an administrator’s desk.”

Phihong’s new power injector supports 10/100/1000 Base-T data rates and is managed by SNMPv2c protocol. SNMP manuals, firmware and MIB functions for enterprise networks can be found at http://midspans.com/pages/support.php. The device features a minimum average efficiency of 73% and bears safety markings for CE and UL. Standard features include over-voltage, over-current and short-circuit protections.

Rated IP67 for waterproof operation, the unit can be safely operated in temperatures ranging from -40°C to 60°C. The three ports on the front of the device connect to standard ¾” NPT conduit piping. Phihong also offers cable glands for one (PGLAND750) or two (PGLAND750-2) cables to ensure watertight operation. When using outdoor midspans, AC and Ethernet cables must be rated to the appropriate electrical codes for the intended environment.

Installed in the included mounting bracket the new injector measures 300mm (11.81”) x 184mm (7.24”) x 82mm (3.23”) and weighs 2.8Kg (6.24lbs). Pricing for the device starts at $349.12 per unit. For more information, including a product datasheet, please visit the website www.midspans.com.

Phihong USA, a global leader in the development of Power-over-Ethernet technology and solutions, has developed a new single-output midspan that can power IEEE802.3at compliant applications up to 200 meters (660 feet) from a network switch. The waterproof injector, designated the POE33S-1AT-N, has an output of 33.6W at 56V DC and is ideal for applications in harsh environments, including IP cameras and wireless access points. The midspan is also equipped with SNMP protocol, which allows users to remotely troubleshoot end devices.

“The benefit of waterproof PoE is that users can install them in locations that are difficult to reach and service,” said Keith Hopwood, vice president of marketing for Phihong USA. “By combining the benefits of our extender technology with SNMP, users can enhance their security networks by placing powered devices in remote locations and comfortably troubleshoot from an administrator’s desk.”

Phihong’s new power injector supports 10/100/1000 Base-T data rates and is managed by SNMPv2c protocol. SNMP manuals, firmware and MIB functions for enterprise networks can be found at http://midspans.com/pages/support.php. The device features a minimum average efficiency of 73% and bears safety markings for CE and UL. Standard features include over-voltage, over-current and short-circuit protections.

Rated IP67 for waterproof operation, the unit can be safely operated in temperatures ranging from -40°C to 60°C. The three ports on the front of the device connect to standard ¾” NPT conduit piping. Phihong also offers cable glands for one (PGLAND750) or two (PGLAND750-2) cables to ensure watertight operation. When using outdoor midspans, AC and Ethernet cables must be rated to the appropriate electrical codes for the intended environment.

Installed in the included mounting bracket the new injector measures 300mm (11.81”) x 184mm (7.24”) x 82mm (3.23”) and weighs 2.8Kg (6.24lbs). Pricing for the device starts at $349.12 per unit. For more information, including a product datasheet, please visit the website www.midspans.com.

Phihong USA, a global leader in the development of Power-over-Ethernet technology and solutions, has developed a new single-output midspan that can power IEEE802.3at compliant applications up to 200 meters (660 feet) from a network switch. The waterproof injector, designated the POE33S-1AT-N, has an output of 33.6W at 56V DC and is ideal for applications in harsh environments, including IP cameras and wireless access points. The midspan is also equipped with SNMP protocol, which allows users to remotely troubleshoot end devices.

“The benefit of waterproof PoE is that users can install them in locations that are difficult to reach and service,” said Keith Hopwood, vice president of marketing for Phihong USA. “By combining the benefits of our extender technology with SNMP, users can enhance their security networks by placing powered devices in remote locations and comfortably troubleshoot from an administrator’s desk.”

Phihong’s new power injector supports 10/100/1000 Base-T data rates and is managed by SNMPv2c protocol. SNMP manuals, firmware and MIB functions for enterprise networks can be found at http://midspans.com/pages/support.php. The device features a minimum average efficiency of 73% and bears safety markings for CE and UL. Standard features include over-voltage, over-current and short-circuit protections.

Rated IP67 for waterproof operation, the unit can be safely operated in temperatures ranging from -40°C to 60°C. The three ports on the front of the device connect to standard ¾” NPT conduit piping. Phihong also offers cable glands for one (PGLAND750) or two (PGLAND750-2) cables to ensure watertight operation. When using outdoor midspans, AC and Ethernet cables must be rated to the appropriate electrical codes for the intended environment.

Installed in the included mounting bracket the new injector measures 300mm (11.81”) x 184mm (7.24”) x 82mm (3.23”) and weighs 2.8Kg (6.24lbs). Pricing for the device starts at $349.12 per unit. For more information, including a product datasheet, please visit the website www.midspans.com.

About Phihong

As a world leader in the development of world class power solutions, Phihong is one of the leading supplies of adapters, power supplies, LED drivers and Power-over Ethernet products to ODMs serving datacom, telecom, personal electronics, networking, lighting and industrial markets. Phihong has a truly global reach with design labs, manufacturing facilities and sales support centers in California, New York, The Netherlands, China, Japan and Taiwan. For more information contact Thomas Hopwood at Phihong USA Corporation, 47800 Fremont Blvd., Fremont, CA 94538, or call (510) 445-0100, fax (510) 445-1678, email email poe@phihongusa.com, or visit http://www.midspans.com.