Phihong is committed to providing the complete information you need to install and manage our best-in-class midspans. We thank you for your interest in our PoE power products.
For technical issues, including questions about previous versions of our POE GUI Software, please contact us at firstname.lastname@example.org.
PoE Firmware (for use with/without all versions of SNMP)
POE806U-AT Firmware (rev. 1.2)
POE370 Series Firmware (Rev. 3.3)
POE576U AT Series Firmware (Rev. 1.4)
POE576U AFAT Series Firmware (Rev. 1.4)
POE125U Series Firmware (Rev. 2.5)
PoE Midspan GUI (for all versions of SNMP: IEEE802.3af/at midspans)
Phihong Midspan POE GUI Installation (v.1.0) (Windows XP/Vista/7/10*)
Phihong Midspan POE GUI User Manual (v.1.3)
SNMP MIB (2/20/2008) (for IEEE802.3af/at midspans with SNMPv2 or v3)
PL2303 Prolific Driver Installer (v1.13)
SNMPv2 Firmware and Upload Program (v. 2/20/08) (Windows XP/Vista/7)
*Windows 10 operation requires the following hardware installed in the Midspan – Prolific IC PL2303HXD or later. Please run Phihong Midspan POE GUI installation but hit no when asked to install the prolific driver. After the GUI finishes please connect the computer to the midspan via USB cable. Use the Prolific Driver zip file located here and first run check chip version with your computer. If the check chip version confirms Windows 10 compatibility then please install the prolific driver located in the zip file. This will allow Windows 10 GUI operation.
**This firmware may be used for the following products: POE75U-1UPN, POE125U-4ATN, POE240-2MPN, POE240U-4UPN, POE576U-8UPN, POE576U-4MPN, and POE806U-8MPN.